Methods to Improve the Quality of Aluminum Alloy Die Castings
05.11.2020
In recent years, the application of aluminum alloy die casting and zinc alloy die casting has become more and more widely used. In die casting product...
Common defects and prevention of low pressure casting
05.11.2020
1, characteristics(1) Pore: hole-like defects formed by gas inside the casting. Its surface is generally smooth, mainly pear-shaped, round or oval. Ge...
Advantages and Defects of Low Pressure Die Casting
05.11.2020
Low-pressure casting: liquid metal (aluminum liquid) under the influence of small external pressure (20-80kPa), the introduction of liquid metal from ...
Metal Casting/Gravity die casting/Permanent Mold Casting: aluminum liquid pouring into the metal die by gravity casting method to obtain a casting.As ...
Why die casting parts is always oversized, let me tell you the reasons
05.11.2020
Die casting parts have many defects such as cold flowers, shrinkage, bubbles, flash, etc. There is also another defect is oversize, because in product...
With the development of science and technology, Die Casting applications more widely, it can be said that applied to all fields. However, when in prod...
Aluminum Die Casting Material Advantages Aluminum suitable for die-casting process is die-cast aluminum, usually die-cast aluminum. It has a higher t...
Zinc alloy die casting parts are usually used in the electronics, electrical peripherals and other parts, so excellent appearance, good corrosion resi...
1. Sand casting is preferred According to statistics, 60% ~ 70% of the castings in our country or in the world are made of sand, and about 70% of th...
Aluminum for its proportion of small, easy processing, mechanical strength and other characteristics over the years is widely used in the building's d...
Many industrial operations choose to invest in die casting surface treatment for their parts. Here are a number of worthwhile casting surface finish o...
